Obstruction Warning Lights in UAE, Saudi, Oman, Qatar, Bahrain, Pak

Obstruction Warning Lights

ICAO,Civil Aviation Authority Certificated


    All obstructions as per ICAO/FAA/CAA regulations needs to be lighted or marked with air craft warning lights or beacon lights.These are high-intensity lighting devices installed on tall structures . Such lighting devices make these structures more visible to aircraft, and are usually used at night, although they can be used during the day time as well.These Beacon lights are high impact resistant and suitable for harsh environment and conditions.

ICAO definition of Obstacle

    All fixed (whether temporary or permanent) objects that are:

  • Located in an area intended for the surface movement of aircraft
  • Extend above a defined surface intended to protect aircraft in flight
  • Stand outside those defined areas that have been assessed as being hazardous to air navigation.

Product Range

  • Low intensity lights (Day & night beaconing of obstacle below 45 mtr height)
  • Medium intensity lights (Day & night beaconing of obstacle between 45 and 150 mtrs height)
  • High intensity lights (Day & night beaconing of obstacle above 150 mtrs height)


  • Photocell
  • Dry contact
  • Control Panel
  • Solar Power supply
  • Connection box
  • Mounting

Application Areas

  • Buildings
  • Cranes
  • Engineering structures (Monuments,bridges etc)
  • Pylons (Telecommunication towers)
  • HV Lines
  • Airports

General Specifications

  • Flashing: 20~60 times/min (as required)
  • Light Source: White/ Red LED
  • Lifespan: 100,000 hours
  • Wind load: 240 km/hour
  • Operating temperature: 40℃~55℃
  • IP-Rating: 65/66
  • Power: 48V DC / 110 to 240V AC

Standards & Certifications

  • ICAO (Annex 14, Volume I, Chapter 6)
  • FAA (Compliant FAA L-864 )
  • CE (EN60947-1, CEI60364, NF C15-100 2014 / 35 / UE)